Hotline : 0986227171
Bộ lưu điện UPS Makelsan Powerpack SES RT 6kVA là dòng UPS công nghệ cao, thích hợp dành cho máy chủ và các thiết bị điện tử nhạy cảm quan trọng như: thiết bị điện gia đình, các thiết bị điện công ty( máy tính, máy in...), dùng cứu thang máy,...
Khắc phục được các sự cố mất điện, sụt nguồn, hạ áp,… Bộ lưu điện UPS online 6-10kVA Makelsan không có thời gian chuyển mạch, hoặc thời gian chuyển mạch là 0ms.Thời gian lưu điện lâu tùy thuộc vào nhu cầu của khách hàng.
– bộ lưu điện makelsan powerpack ses rt6kva chất lượng cao Nhập khẩu nguyên chiếc Châu Âu. Chúng tôi luôn sẵn hàng và linh kiện thay thế cho tất cả các dòng công suất.
– Giá tốt nhất trên thị trường BÁN LẺ. Đặc biệt hỗ trợ ĐẠI LÝ
– Khảo sát, tư vấn, thiết kế MIỄN PHÍ.
- Lắp đặt, hướng dẫn vận hành tận nơi.
Capacity | 6kVA / 5.4kW | 10kVA / 9kW | ||||||
Input | ||||||||
Phase | 3 Phase 4 Wires and Ground or Single Phase & Ground | |||||||
Rated Voltage | 380/400/415Vac or 220/230/240VAC | |||||||
Voltage Range | 208~478Vac or 120VAC-276VAC | |||||||
Frequency Range | 40Hz-70Hz | |||||||
Power Factor | ≥0.99 | |||||||
Current THDi | ≤5% (100% Nonlinear Load) | |||||||
Bypass Voltage Range | Max. Voltage: +15% (Optional +5%, +10%, +25% ) Min. Voltage: -45% (Optional -20%, -30%) | |||||||
Frequency Protection Range: ±10% | ||||||||
ECO Range | Same As The Bypass | |||||||
Generator Input | Support | |||||||
Output | ||||||||
Phase | Single Phase & Ground | |||||||
Rated Voltage | 220/230/240VAC | |||||||
Power Factor | 0.9 | |||||||
Voltage Regulation | ±2% | |||||||
Frequency | Utility Mode | ±1%, ±2%, ±4%, ±5%, ±10% of The Rated Frequency (Optional) | ||||||
Battery Mode | (50±0.2) Hz | |||||||
Crest Factor | 3:1 | |||||||
THD | ≤2% With Linear Load; ≤5% With Non-linear Load | |||||||
Waveform | Pure Sinewave | |||||||
Efficiency | ECO Mode 97%; Normal Mode 90% | |||||||
Battery | ||||||||
Voltage | Standard: 192Vdc; Optional Voltage: 216/240Vdc | |||||||
Backup Time | Full Load 2min( Standard), Long Time Unit Depends on The Capacity of External Batteries | |||||||
Estimated Remaining Time Displayed on the LCD | ||||||||
Recharge Time to 90% | 8~10 Hours (Standard) | |||||||
Charging Current | Maximum Current 6A; Charge Current can be Set According to Battery Capacity Installed. | |||||||
Battery Socket | Hardwire | |||||||
Transfer Time | Utility to Battery : 0ms; Utility to Bypass: 0ms | |||||||
Protection | ||||||||
Overload | AC Mode | Load 110%: Last 90S, 125%15S: Last 30S, 150%: Last 0.5S, 150% Shut Down UPS Immediately | ||||||
Bat. Mode | Load 110%: Last 15S, 125%: Last 0.5S, 150%: Last 1250ms, 150% Shut Down UPS Immediately | |||||||
Bypass Mode | 40A (Input Breaker) | 60A (Input Breaker) | ||||||
Short Circuit | Hold Whole System | |||||||
Overheat | Line Mode: Switch to Bypass; Backup Mode: Shut Down UPS Immediately | |||||||
Battery Low | Alarm and Switch off | |||||||
Self-Diagnostics | Upon Power On and Software Control | |||||||
EPO (Optional) | Shut down UPS Immediately | |||||||
Battery | Complies with EN62040-2 | |||||||
Alarms | ||||||||
Audible & Visual | Line Failure, Battery Low, Overload, System Fault | |||||||
Display | ||||||||
Status LED & LCD | Line Mode, Backup Mode, Eco Mode, Bypass Mode, Battery Low, Battery Bad, Overload & UPS Fault | |||||||
Reading on the LCD | Input Voltage, Input Frequency, Output Voltage, Output Frequency, Load Percentage, Battery Voltage, Inner | |||||||
Temperature & Remaining Battery Backup Time | ||||||||
Physical | ||||||||
Dimension (W×D×H) (mm) | 443×131(3U)×580 | |||||||
Weight (kg) | 23 | 25 | ||||||
Input Connection | Hardwire | |||||||
Output Connection | Hardwire | |||||||
External Battery Connection | Hardwire | |||||||
Comunication Interface | USB (Optional) , RS485 (Optional) , Parallel Port (Optional) , SNMPCard (Optional) ,Centralized Monitoring Card (Optional) | |||||||
Environment | ||||||||
Operating Temperature | 0~40°C | |||||||
Storage Temperature | -25°C~55°C | |||||||
Humidity | 0%~95% (Non-Condensing) | |||||||
Altitude | <1500m | |||||||
Safeity Conformance | CE,EN/IEC 62040-2,EN/IEC 62040-1-1 |
CÔNG TY CP ASIA ANH EM - Hotline : 0948800018 - 0986227171 - Email: ceo.asiaanhem@gmail.com