Hotline : 0986227171
Features
Microprocessor-based digital control technology
Faster and more accurate processing of data
Wide Input Voltage Range
Aide UPS is capable of handling a wide input voltage range, supplying clean power in extreme circumstances. It has excellent voltage regulation ability with an ultra-wide input voltage range from 80 ~ 150Vac or 145 ~ 295Vac.
Built-in AVR
Aide UPS provides stable power to connected devices in unstable power conditions.
It has built-in automatic voltage regulator, safety running in a wide voltage range, reduces the using of battery, prolongs the life of battery, especially suitable for power fluctuations or poor power areas, supplying clean power in extreme circumstances.
Surge protection
Built-in precisely controlled power protection circuit, eliminate the interference of low voltage and surge, thus protecting the equipment against voltage spikes.
Short-circuit and overload protection
A short circuit is an abnormal connection between two nodes of an electrical circuit, and can cause huge damage to the UPS and any equipment attached to it. Aide circuit protection device will protect against potential short circuit damage, overheating, fire or even explosions. Aide is also equipped with overload protection, meaning that the fuse will automatically be triggered when a load exceeds its value. Both protection devices ensure the safety and reliability of the UPS and any equipment that is attached to it.
Auto sensing frequency
Aide UPS uses frequency adaptive technology. When UPS connect to mains with frequency 50HZ or 60HZ, the system will detect the frequency of mains power, and the output frequency will be the same as the detected frequency even when the mains power fails.
High-speed synchronous conversion
Aide system can automatically track the mains phase, to ensure that the inverter output voltage and mains voltage are identical, decrease the transfer time and surge voltage, minimize the interference to electrical equipment.
Cold start capability
In the absence of any AC input, the cold start function allows users to start UPS with batteries, and without any damage to them or the circuits. Users can easily configure the UPS, even if no AC input is available.
Intelligent battery management
Ø Aide series UPS adopt interactive Design. When mains power is connected, Aide system will automatically charging the battery, even the UPS is OFF, to ensure the battery have enough power. When the mains power fails, Aide system will automatically switch to battery mode to provide sufficient runtime for the load saving data and safety shutdown.
Ø Aide UPS also be featured with battery temperature compensation to extend the battery life, three-stage charging to shorten recharge time and battery overcharge / over-discharge protections as well.
Intelligent power ON/OFF
Ø When the mains power is restored after discharge of the batteries, Aide UPS will automatically restart and self-diagnose to ensure the functionality of the UPS system and batteries.
Ø Aide system can detect load and automatically shut down in the no-load state (Optional). When the load is less than 5%, the system detects that it is under idling/no-load state, it will automatically shut down in about one minute, reduce losses, effectively extending the life of batteries.
User friendly LED and LCD display
The user friendly LED display, which is situated on the front panel of Aide UPS, provides instantaneous information. Aide LCD model have a backlit LCD display for users to observe the UPS status information, load and battery performance.
Advanced multi-platform communications
RS232 / USB communication port (Optional).
What do we get from using management software
Ø More customized functions.
Ø Settable battery discharge and low-voltage test. Through this function users can easily see batteries in good or bad condition.
Ø Timing boot/shutdown for UPS is available.
Ø Unattended Safe Shutdown by software. AWP Software is able to intelligently save the data and automatically shut down the sever or computer when a power failure occurs. This software allows the UPS to instruct the operating systems to close down a PC when it is running unattended. Users can set the parameters with which to schedule when the computer or server should shutdown, making sure that no significant data is lost and important backups are created. /useruploads/userfiles/2719/files/01%20AIDE%20400-2000VA.pdf
apacity | 400 VA | 600 VA | 800 VA | 1200 VA | 1500 VA | 2000 VA | |
INPUT | |||||||
Voltage | 100 V / 110 V / 120 V: 80 ~ 150 Vac; 220 V / 230 V / 240 V: 162 ~ 295 Vac | ||||||
Frequency | 50 / 60 Hz ± 10% (auto-sense) | ||||||
OUTPUT | |||||||
Voltage | 100 V / 110 V / 120 Vac ± 10% or 220 V / 230 V / 240 Vac ± 10% | ||||||
Frequency | 50 / 60 Hz ± 1% (auto-sense) | ||||||
Waveform | Mains mode: pure sine wave ; battery mode: simulated sine wave | ||||||
Transfer time | Typical 2 ~ 7 ms; Max.10 ms | ||||||
BATTERIES | |||||||
DC voltage | 12 V | 24 V | |||||
Configuration | 12 V / 4.5 Ah × 1 | 12 V / 7.0 Ah × 1 | 12 V / 8.0 Ah × 1 | 12 V / 7.0 Ah × 2 | 12V / 8.0 Ah× 2 | 12 V / 9.0 Ah× 2 | |
Recharge time | 6 ~ 8 h | ||||||
COMMUNICATIONS | |||||||
USB / RS232 / SNMP (optional) | Supports Windows® 98 / 2000 / 2003 / XP / Vista / 2008 / Windows®7 / 8 / 10 | ||||||
OTHERS | |||||||
Protections | Short circuit - battery overcharge – overdischarge – overload - surge | ||||||
Humidity | 20 ~ 90% RH @ 0 ~ 40℃ (non-condensing) | ||||||
Noise level | ≤ 45 dB (1m) | ||||||
Plastic | Net / Gross weight (kg) | 3.8 / 4.3 | 4.3 / 4.8 | 5.3 / 5.8 | 9.5 / 10.0 | 10.7 / 11.2 | — |
Dimensions (W×D×H) (mm) | 100×280×140 | 140×345×170 | — | ||||
Packaged dimensions (W×D×H) (mm) | 139×325×210 | 198×406×245 | — | ||||
Quantity / 20ft | 2300 pcs | 1000 pcs | — | ||||
Metal | Net / Gross weight (kg) | — | 5.5 / 6.0 | 6.7 / 7.2 | 10.5 / 11.2 | 12.6 / 13.4 | 14.0 / 14.8 |
Dimensions (W×D×H) (mm) | — | 95×320×160 | 125×320×225 | 125×380×225 | |||
Packaged dimensions (W×D×H) (mm) | — | 145×375×230 | 180×390×295 | 180×450×295 | |||
Quantity / 20ft | — | 2000 pcs | 1000 pcs | ||||
Rack mount | Net / Gross weight (kg) | — | 7.8 / 8.3 | 9.0 / 9.5 | 12.6 / 13.2 | 15.7 / 16.3 | 17.0 / 17.6 |
Dimensions (W×D×H) (mm) | — | 308×438×88 | 308×438×132 | ||||
Packaged dimensions (W×D×H) (mm) | — | 395×525×185 | 395×525×225 |
CÔNG TY CP ASIA ANH EM - Hotline : 0948800018 - 0986227171 - Email: ceo.asiaanhem@gmail.com